MP-3 Manual Post Puller Assembly with Chain Assembly and Grabber
The MP-3 is capable of pulling toughest posts. This puller has phenomenal strength to weight ratios. At 41lbs, the MP-3 is easily field portable and is equipped to meet most pulling needs. The MP-3 is simple to operate and is built with high grade materials. This unit is nearly indestructible and will provide decades of service
DIRECTIONS
| STEP 1 |
The Post Grabber is removed from its storage position and placed around the post. The puller is set with its base next to the post, the handle extended, and the hook removed from its carry position. |
| STEP 2 |
The chain is placed into the two position chain receiver first notch for speed / second notch for power then hooked to the Post Grabber. |
| STEP 3 |
The operator attaches the safety restraint to the chain, then pulls the post. |
| STEP 4 |
After pulling the post, the MP-3 is returned to its carrying configuration. With the Post Grabber and chain locked in place, the MP-3 is ready to pull the next post. |
ACCESSORIES
INCLUDED IN THE FOLLOWING KITS
| PD-45 Utility Kit |
71276 |
|
PDT-45 Total Solution Kit |
71268 |
| PD-55 Utility Kit |
71269 |
|
PDT-55 Total Solution Kit |
71269 |
| PD-110 Utility Kit |
71278 |
|
PDT-110 Total Solution Kit |
70014 |
| PD-140 Utility Kit |
71279 |
|
PDT-140 Total Solution Kit |
71271 |
| PD-200 with 5½" Master Chuck Utility Kit |
71331 |
|
PD-200 with 7" Master Chuck Utility Kit |
71332
|
