This site protected by Trustwave's Trusted Commerce program SSL site seal

GPD-45 Multi-Pro XA Gas Powered Post Driver

$2,700.00

Weight: 58 lbs

Add to Cart:

GPD-45 Multi-Pro XA Gas Powered Post Driver

*Shipping: 59 pounds 33" X 15" X 18"

The XA model was designed at the request of sign installers, municipalities and rental houses.  The XA Model is the Multi-Pro with the extended anvil andlonger Chuck-Lok already installed.  This makes it truly a four (4) bolt change to switch to channel post, square tube and back to round.  The XA will weigh in only 7lbs heavier than tthe standard Multi-Pro and is primarily designed for higher productiving and U-Channel sign installers.

Rhino has an ergonomically deisgned the handles for eight distribution and incorporated internal vibration dampening for the operator's comfort.  Though the driver is economically priced, the GPD-45 Multi-Pro XA components are engineered to the highest standards.  The design of the Rhino GPD-45 Multi-Pro XA includes Rhino Chuck-Lok adaptor technology.  This innovative post adaptor system increses driving efficiency by aligning post to optimum striking position, prolongs tool life, and provides flexibility to quickly adapt to different post sizes in the field.  When ordering specify the adaptors you need.

The driver is manufactured in the USA from the very best materials to promote long tool life, including heat-treated alloy steel, "aircraft quality" aluminum, stainless steel fasteners and sealed bearing on all rotating parts.

Shipped with 2", 1-3/4" and 1" chuck sleeve, allowing you to quickly switch between many post types.

Covered under Rhino's Limited LIfetime Warranty

*** Free ground shipping within Continental United States ***

TECHNICAL SPECIFICATIONS

Overall Dimensions (H x W x D) in 26 x 10-3/4 x 17
Weight lbs 51
Power   Honda GX35 4-stroke engine
Performance bpm 1720
Fuel   Regular Unleaded Gasoline
Engine Oil   SAE 10W-30
Grease   Rhino SynLube

APPLICATIONS

Type or Size of Post to be Driven Accessor/Adaptor Required
Fiberglass T-Post 2" adaptor
T-Post 2" adaptor
5/8" or 3/4" Ground Rod 1" adaptor
Tent Stake Tent Stake Chuck
Concrete Form Pin Form Pin Chuck
1"  to 1-7/8" Post 2" adaptor
2" - 2-3/8" Post Standard Chuck
1-1/2" to 2-1/2" Square Post and Square Post Sign Anchor Chuck and Drive Cap
1.2 - 4lb Channel Post and Channel Post Sign Anchor Channel Chuck

 MULTI-PRO KITS

Multi-Pro Muncipality Drive Kit 301185
 Included in Kit:  
 - Short chuck Tube (must have with any Aquare Anchor Drive Caps) 301171
 - 1-3/4" Square Anchor Drive Capt - for 1-1/2" ID Posts 300932
 - 2" Square Anchor Drive Cap - for 1-3/4" ID Posts 300933
 - 2-1/4" Squre Anchor Drive Cap - for 2" ID Posts 300934
 - 2-1/2" Square Anchor Drive Cap - for 2-1/4" ID Posts 300935
 - Channel Post Chuck 301159
 - Channel Post Anvil 301169
   
Multi-Pro U-Channel Drive Kit
1.2-4lb Channle Post and Channel Post Sign Anchor
301175
Included in Kit:  
 - Channel Chuck 301159
 - Channel Post Anvil 301169
   

ACCESSORIES AND REPLACEABLE PARTS

Rhino Formula Grease - 10 hr grease 300500

DOCUMENTATION

GPD-45 Multi Pro Operators Manual
GPD-45 Multi Pro U-Channel Drive Kit Installation Instructions
GPD-30, 40, and 45 LImited Lifetime Warranty Statement

 


  • Model: RHINO301003