PD-55 Postmaster and Plus Post Driver

$2,285.00

Weight: 110 lbs

Add to Cart:

PD-55 Postmaster Driver for Postmaser and Plus Posts

For professional fence installer using the Master Halco® Postmaster and Postmaster Plus® Fence Systems, and similar type of post systems.

  • Installed with PD-55 Postmaster Chuck and Adaptor to drive both original Postmaster Post and Postmaster Plus Post.
  • Other PD-55 bolt-in adaptors can be sued with the Postmaster chuck - just remove the special Postmaster adaptor and replace with another PD-55 adaptor.  SOLD SEPARATELY
  • Already own a PD-55 - Just order the Chuck and Adaptor (70620)
  • For more information on Master Halco Posts or to find a Master Halco dealer visit www.masterhalco.com

 

** FREE SHIPPING within the Continental United States

SPECIFICATIONS

TOP COVER Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed.
BODY Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.
PISTON Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
MASTER CHUCK & CHUCK ADAPTORS The 3 7/8" (98.4 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts.
FASTENERS S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated.
AIR CONSUMPTION 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2)
WEIGHT 55 lbs.
HEIGHT 21"

ACCESSORIES AND ADAPTORS

PD-55 Postmaster Chuck and Adaptor Drive Kit 70620      
 - PD- 55 Postmaster Chuck, Slotted Chuck 70589      
 - PD-55 Postmaster Adaptor (will only work with 70589 hardware) 70677      
         
Throttle Valve Kit with 5' Hose Whip 600000   3½" ID Chuck Adaptor 70609
Filter-Regulator-Lubricator and Carrier pre-assembled 225005   3" ID Chuck Adaptor 70610
 - Filter-Regulator-Lubricator 
   For operator safety and post driver protections
601128   2½" ID Chuck Adaptor 70611
 - Carrier for Filter-Regulator-Lubricator 225001   2" ID Chuck Adaptor 70612
CHUCKS     1½" ID Chuck Adaptor 70613
PD-55 37/8" ID Master Chuck 70592   1" ID Chuck Adaptor 70614
PD-55 4¼" Round Master Chuck 70060   2" PD-55 Heavy Chuck Adaptor 70615
4" x 4" Wood Post Chuck 
(Chuck size 41/16" x 41/16")
70590  
CHANNEL POST CHUCK ADAPTOR
 
Custom Master Chuck Assembly 70762   1.2 - 1.5 lbs/ft Posts 70617
MISCELLANEOUS     2.0 - 2.75 lbs/ft Posts 70618
Transport Cart 71201   3.0 - 4.0 lbs/ft Posts 70619
Hose Assembly - ¾" and up to 25' Hose.  Includes assembly, labor and all parts EXCEPT hose.  Order ¾" Extra Hose per foot 605006 607000   BREAK-AWAY SYSTEMS  
¾" Extra Hose - price per foot 605006   PD-55 Chuck Adator for Channel POst Break-Away Anchor System 70832
Air Hose Assembly - 100' x ¾" 100048   Driver Cap for the Channel Post Break-Away Anchor System 70836
      PD-55 Chuck Adator for Square Tube Break-Away Anchor System 71014
DRIVE CAPS     1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin 71004
2" Drive Cap for Schedule 40 Pipe with T-Bar and Clip 71260   1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin 71005
2½" Drive Cap for Schredule 40 Pipe with T-Bar and Clip 71261   1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin 71006
3" Drive Cap for Schedule 40 Pipe with T-Bar and Clip 71262   2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin 71007
      2¼" Low Drive Extension Drive Cap for Squiare Break-Away Bases 2" Pin 71008
      2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin 71009

DOCUMENTATION

PD-55 Fast Facts
PD-55 Safety and Operating Instruction
PD-55 Parts List Breakdown
Filter-Regulator-Lubricator Parts List
Throttle Valve Assembly Parts List

 


  • Model: RHINO70019