PD-110 Fence Post Kit

$4,240.13

Add to Cart:

Smallest of the big drivers, the PD-110 is the perfect balance between a hand-held driver and an equipment supported driver.  At 109 pounds and a 4" piston, the PD-110 is a powerhouse that will put tough jobs behind you and money in your pocket.  The PD-110 si ideally suited for driving 2" to 4" pipe and tube, structural forms, pin piles, dock piles, and 4" x 4" wood.

KIT INCLUDES

PD-110 Medium Duty Post Driver 1 70014
PD-110 3" ID Chuck Adaptor 1 70623
Throttle Valve Kit, includes 5' Hose Whip 1 600000
Filter Regulator Lubricator & Carrier 1 225005
Hose Whip - 15' 2" 1 71199

SPECIFICATIONS

TOP COVER Ductile iron casting, high in strength and ductility has 1" (25.4 mm) diameter handles with chain loop designed into the cover for easy handling and carrying. O-Ring sealed.
BODY Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter side handles for easy handling. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.
PISTON Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
MASTER CHUCK & CHUCK ADAPTORS The 4 1/4" (107.9 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 5/8" (92 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. A chuck is available to drive 4" x 4" (101 mm x 101 mm) wood posts and a chuck and drive cap are available to drive 4" x 6" (101 mm x 152 mm) H column guard rail posts.
FASTENERS S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated.
AIR CONSUMPTION  64 CFM (1.81 m3/min) @ 100 PSI (7 kg/cm2)
WEIGHT 116 lbs
HEIGHT 25.75"

ACCESSORIES AND ADAPTORS

Throttle Valve Kit with 5" Hose Whip* 600000   Chuck Adaptors
Filter-Regulator-Lubricator and Carrier pre-assembled 225005   35/8" ID Chuck Adaptor 70622
 - Filter-Regulator-Lubricator* 601128   3" ID Chuck Adaptor 70623
 - Carrier for Filter-Regulator-Lubricator 225001   2½" ID Chuck Adaptor 70624
Transport Cart 71202   2" ID Chuck Adaptor 70625
Hose Assembly - ¾" Hose  up to 25'.  Includes assembly, labor and all parts EXCEPT Hose.  Add 605006 for each foot of hose needed 607000      
¾" Extra Hose - price per foot 605006   Channel Post Chuck Adaptors
Air Hose Assembly - ¾" x 100' 100048   1.2 - 1.5 lbs/ft Posts 70628
PD-110 Chuck Adaptor for the Channel Post Break-Away Anchor System 70847   2.0 - 2.75 lbs/ft Posts 70629
Drive Cap for the Channel Post Break-Away Anchor System 70836   3.0 - 4.0 lbs/ft Posts 70630
         
Low Drive Extension Drive Caps   Post Driver Chucks
1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin 71004   PD-110 4¼" ID Master Chuck 70593
1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin 71005   PD-140 4¼" ID Master Chuck 70594
1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin 71006   4" x 6" H Column Chuck (Chuck Size:  57/8" x 75/8") 70061
2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin 71007   4" x 4" Wood Post Chuck (chuck size: 41/16 x 41/16") 70063
2¼" Low Drive Extension Drive Cap for Square Break-Away Bases 2" Pin 71008   PD-140 Slott Sheet Pile Master Chuck 70597
2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin 71009   4" x 6" PD-140 Wood Master Chuck Assy 71100
      PD-140S 4¾" Round Master Chuck 70644
Schedule 40 Drive Cap with T-Bar & Clip   4" x 6" PD-200 Master Chuck (chuck size 57/8" x 75/8") for the H-Column Guardrail Post System 70061
2" Sched 40 Drive Cap with T-Bar and Clip 71260   Custom Master Chuck Assembly 70762
2½" Sched 40 Drive Cap with T-Bar and Clip 71261      
3" Sched 40 Drive Cap with T-Bar and Clip 71262      
3½" Sched 40 Drive Cap with T-Bar and Clip 71263      

** FREE ground shipping within Continental United States

DOCUMENTATION

PD-110 Fast Facts
PD-110 Safety and Operating Instruction
PD-110 Parts List Breakdown
Filter-Regulator-Lubricator Parts List
Throttle Valve Assembly Parts List
 

 


  • Model: RHINO71344