PD-140 Fence Post Kit

$4,226.53

Add to Cart:

The PD-140 is a power performer.  Often referred to as the guard rail driver, the PD-140 is fully capable of driving posts that competitive systems simply cannot.  No other system strikes the balance between investment and return as does the PD-140.  Thanks to the 4" piston and 139 lb. ductile iron casting body, the PD-140 is ideally suited to drive guard rail posts, heavy line posts, corner posts, gate posts, baseball backstops, dock piles, pin piles, foundation piles, wood posts, concrete posts, heavy gauge aluminum posts, well points, well casing and fence posts from 2" to 4" in diameter.

INCLUDES

PD-140 Heavy Duty Post Driver 70015
PD-140 3" Chuck Adaptor 70635
Throttle Valve Kit with 5'2" Hose Whip 600000
Filter Regulator Lubricator 601128
Carrier for Filter Regulator Lubricator 225001
Hose Whip - 15' 2" 71199

SPECIFICATIONS

TOP COVER Ductile iron casting, high in strength and ductility has 1" (25.4 mm) diameter handles with chain loop designed into the cover for easy handling and carrying. O-Ring sealed.
BODY Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter side handles for easy handling. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.
PISTON Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
MASTER CHUCK AND CHUCK ADAPTORS The 4 1/4" (107.9 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 5/8" (92 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. A chuck is available to drive 4" x 4" (101 mm x 101 mm) wood posts and a chuck and drive cap are available to drive 4" x 6" (101 mm x 152 mm) H column guard rail posts.
FASTENERS S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated.
AIR CONSUMPTION 64 CFM (1.81 m3/min) @ 100 PSI (7 kg/cm2)
WEIGHT 139 lbs.
HEIGHT 25.75"

ACCESSORIES AND ADAPTERS

Throttle Valve Kit with 5' Hose Whip 600000   CHUCK ADAPTORS
Filter Regulator Lubricator 601128   35/8" ID Chuck Adaptor 70634
Carrier for Filter Regulator Lubricator 225001   3" ID Chuck Adaptor 70635
Filter Regulator Lubricator and Carrier - Pre-Assembled 225005   2½" ID Chuck Adaptor 70636
      2" ID Chuck Adaptor 70637
POST DRIVER MASTER CHUCKS      
PD-140 4¼" ID Master Chuck Assy 70644   CHANNEL POST CHUCK ADAPTORS
4" x 4" Wood Post Chuck (Chuck size 41/16" x 41/16" ) 70063   1.2 - 1.5 lbs/ft Posts 70640
4" x 6" H Column Chuck (Chuck size 57/8" x 75/8") 70062   2.0 - 2.75 lbs/ft Posts 70641
PD-140 Slotted Sheet Pile Master Chuck 70597   3.0 - 4.0 lbs/ft Posts 70642
Custom Master Chuck Assy 70762      
         
MISCELLANEOUS ACCESSORIES
Transport Cart 71203   PD-140 Chuck Adaptor for Square Low Drive Extensions 71015
Hose Assembly - ¾" Hose up to 25'.  Includes assembly, labor, and all parts EXCEPT hose.  Add 605006 per foot of hose needed 607000   1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin 71004
Extra ¾" Hose - price per foot 605006   1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin 71005
Air Hose Assembly - 100' x ¾" 100048   1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin 71006
4" x 6" H Colum Driving Cap (chuck size 4¼" x 6¼") 70062   2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin 71007
      2¼" Low Drive Extension Drive Cap for Square Break-Away Bases 2" Pin 71008
2" Drive Cap for Sched 40 Pipe with T-Bar and Clip 71260   2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin 71006
2½" Drive Cap for Sched 40 Pipe with T-Bar and Clip 71261      
3" Drive Cap for Sched 40 Pipe with T-Bar and Clip 71262      
3½" Drive Cap for Sched 40 Pipe with Slammer Hammer 71263      

DOCUMENTATION

PD-140 Fast Facts
PD-140 Safety and Operating Instruction
PD-140 Parts List Breakdown

Filter-Regulator-Lubricator Parts List

Throttle Valve Assembly Parts List

 


  • Model: RHINO71345